Janfire NH

The Janfire NH (No Hands) pellet burner is manufactured by Janfire AB, the producer of the world’s most reliable pellet burners. The burner has a sophisticated control system which allows the contractor and the end-user to configure many attributes of the burner's behavior to arrive at just the right settings for your application.

Using premium or super premium pellets ash production is 1% of ash weight, or less, and the burner bowl in this top fed burner is kept clean through an automated ashscraping cycle. The cycle period can be configured to accommodate the characteristics of the pellets you're burning. 

Ash removal intervals in systems using the Janfire NH vary with pellet characteristics and quantity burned.  High quality pellets without contamination from non-combustible inorganic material, such as silica, produce fine, powdery ash at 1% or less of the weight of pellets burned. The ash is composed primarily of minerals left behind when the wood burns and is a fine nutrient for gardens and lawns.

The burner's automatic self-cleaning and rapid restart make for effective domestic hot water production.  View the pellet burner in action.

 Features

  • Microprocessor controlled with over 80 contractor and user adjustable parameters
  • Automatic ignition
  • Burning chamber design that ensures complete fuel combustion
  • Automatic burn chamber cleaning
  • Touch button control panel for optimizing performance
  • Very high burn efficiency due to precise auger feed of pellets

Specifications:

Firing rate:  10,000 - 78,000 BTU/hour

Fuel: Premium or Super Premium wood pellets

Power: 120V AC, 6 A, 60Hz

System Requirements: Any listed boiler with a minimum input firing rate of 100K btu/hr with a minimum 18-inch deep boiler firebox with at least 2.3 cubic feet of free volume.  The firebox must have a negative draft between -0.03 and -0.08 inches of H2O or greater.

The Janfire NH is available as a stand-alone unit for installation in the boiler of your choice or with boilers in which it has been tested.  Contact Maine Energy Systems for further information.

Tested and Listed: to UL 391, ETLM 78-1, CAN/CSA-B 366.1 & ASTM- E-1509 by Guardian Fire Test Labs

Warranty: Two year limited manufacturer's warranty with one-year warranty on wear parts.

The Janfire NH pellet burner, in conjunction with a listed boiler, could qualify for a 30% tax credit, not to exceed $1,500, under  Section 25C of the Internal Revenue Code.  The combined system must demonstrate thermal efficiency measurements at, or above, 75% when tested using conventional methods. Please consult your tax consultant to ensure that you qualify for this tax credit.

Retail price:  $4,500 

(We have several burners that have been used some that can be purchased for a 15% discount, first come, first served.  All have been fully serviced to ensure near new condition.)

Other Features:

  • Electronic Auto Ignition, Standard
  • Fully PLC Controlled
  • System Includes Burner, Hopper, Conveyor and Controller.
  • Optional Hopper Extension to 880 LBS
  • Tested and Listed to UL 391, ETLM 78-1, CAN/CSA-B 366.1 & ASTM-E-1509 by Guardian Fire Test Labs
  • 1-Year Limited Manufacturer's Warranty

MSRP: $4,950.00